Trax20203-BLE WiFi Gateway
Trax20203 WiFi and Ethernet(PoE) BLE Gateway, supports BT Low Energy 5.0 standards, compatible with iBeacon, Eddystone, BLE sensor and other BLE supported devices. Capable of connecting to local server or remote cloud server by MQTT/MQTT over SSL/TLS/HTTP/HTTPS protocol over WiFi or Ethernet. Easy to configure with built-in web UI for device setup and connectivity.
Description
Trax20203 designed with 64MHz 32-bit Processor, Built-in Power Amplifier Chip to Precisely Scan BLE beacons, supports AWS/Azure/ARM mBed Iot Cloud. Supports firmware upgrade by OTA and includes batch configuration tool.
| Item | Aspect |
| BT Low Energy | BT Low Energy (BLE) Standards 5.0 standards, compatible with iBeacon and Eddystone |
| Processor | 64MHz 32-bit Processor |
| Data saved | TF data card or Udisk |
| Ethernet | 10/100 Ethernet with 802.3af PoE |
| Cloud | Support AWS/Azure/ARM mBed Iot Cloud |
| Power | Input with DC 5.0V, 1A, Micro-USB |
| OTA | Firmware Upgraded by OTA |
| Connectivity | Support HTTP(SSL/TLS)/MQTT(SSL/TLS & Proxy)/TCP |
| 2 USB | 2.0 Host Connectors and 1 TF Card Slot |
| Ethernet | 10/100 Ethernet with 802.3af PoE |
| Status | RGB LED Strip as the Status Indicator |
| Memory | 128 Mbyte 16-bit DDR2 RAM, 16 Mbyte SPI NOR Flash |
| Scanning & concurrently process | 200 BLE packets per second |
| BLE Gateway performance | |
| BLE Range | 100 indoors, up to 200 meters in open space |
| Scanning & concurrently process | 200 BLE packets per second |
| Frequency Deviation | +/-250 kHz @BLE |
| Maximum Received Signal Strength at <0.1% PER | 0dBm |
| Receiver Sensibility | -108 dBm @250kbps, 0.1% BER-93 dBm @1Mbps, 0.1 %BER |
| RF Power Accuracy | +/- 4 dB |
| Wireless (WiFi) | |
| WiFi Range | up to 90 meters(open space) |
| Wireless | IEEE 802.11b/g/n (single stream) |
| Frequency band | 2.400 – 2.484 GHz |
| Number of selectable Sub channels | 14 channels |
| Maximum receive input level | – 10dBm (with PER < 8%@11 Mbps) – 20dBm (with PER < 10%@54 Mbps) – 20dBm (with PER < 10%@MCS7) |
| Minimum receive input level | – 87dBm (typ. with PER < 8%@11 Mbps) – 70dBm (typ. with PER < 10%@54 Mbps) – 70dBm (typ. with PER < 10%@MCS7) |
| Transmit Power | 17dBm (typical)@ 802.11b11.3dBm (typical)@ 802.11g8.2dBm (typical)@ 802.11n |
| WPA 2.0 Enterprise Encryption | 802.1x auth |
| Data rate | 300 Mbps PHY data rate,802.11b/g/n WiFi |
| WiFi failover | Support WiFi failover & Multi-Higher Level AP Configuration |
| Size | 150x150x36mm |
| Net Weight | 180g |
| Color | White |
| Accessory | 1x USB cable, mental fixing and screws |
| Power supply (Vcc) | 802.3af/at PoE or 5V,1A DC adapter |
| Operating temperature | -25℃ to 65℃ |
| Storage temperature | -40℃ to 85℃ |
| Humidity | Max 95%, Non condensing, relative humidity |
| Compliance | CE, FCC and RoHS |
