Trax10155-LoRaWAN I/O Controller
Trax10155 LoRaWAN I/O Controller contains different I/O Interfaces such as, analog current Input, analog voltage input, relay output, digital input and digital output etc. I/O Modules are designed to simplify the installation of I/O monitoring. Controllers allows the user to send data and reach extremely long ranges. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection and building automation.
Description
The I/O Controller is a simple plug and play device, low cost installation by using LoRaWAN wireless technology
1) If user’s area has LoRaWAN service coverage, they can just install the I/O controller & configure it to connect the LoRaWAN provider via wireless
2) User can set up a LoRaWAN gateway locally and configure the controller to connect to the gateway via wireless
| Features | LoRa Spec |
| LoRaWAN Class A & Class C protocol | Frequency Range |
| Optional Customized LoRa Protocol | Band 1 (HF): 862 ~ 1020 MHz |
| Frequency Bands CN470/EU433/KR920/US915/EU868/AS923/AU915 | Band 2 (LF): 410 ~ 528 MHz |
| AT Commands to change parameters | 168 dB maximum link budget |
| Remote configure parameters via LoRa Downlink | +20 dBm – 100 mW constant RF output vs |
| Firmware upgradable via program port | +14 dBm high efficiency PA |
| Counting | Programmable bit rate up to 300 kbps |
| Interface: | High sensitivity down to -148 dBm |
| 2 x Digital Input (Bi – directional) | Bullet-proof front end: IIP3 = -12.5 dBm |
| 2 x Digital Output | Excellent blocking immunity |
| 2 x Relay Output (5A@250VAC / 30VDC) | Low RX current of 10.3 mA, 200 nA register retention |
| 2 x 0~20mA Analog Input (res:0.01mA) | Fully integrated synthesizer with a resolution of 61 Hz |
| 2 x 0~30V Analog Input (res:0.01v) | FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation |
| Power Input 0~ 24V | Built-in bit synchronizer for clock recovery |
| Hardware System: | Preamble detection |
| STM32L072CZT6 MCU | 127 dB Dynamic Range RSSI |
| SX1276/78 Wireless Chip | Automatic RF Sense and CAD with ultra-fast AFC |
| Power Consumption: | Packet engine up to 256 bytes with CRC |
| 20dB Transmit: 34mA@12v | Dimension: 14 x 8 x 5 cm |
| Idle: 4mA@12v | Weight: 170g |
